Skip to content

Back to Turntables

Pro-Ject T1 Phono SB Walnut Turntable

£349.99

Released: 28th September 2020. New Generation Audiophile Entry Level Turntable with built-in Phono Stage & Electronic Speed Switch The stylish CNC-machined plinth of the T1 features no plastic parts and is carefully manufactured to ensure there are no hollow spaces inside, therefore avoiding unwanted vibrations within the chassis. Carrying this philosophy through the design, the glass platter is also a heavy, zero-resonance design. Finally, the purpose-chosen turntable feet also do a good job of isolating the T1 from ambient vibrations around your hi-fi system. In the T1 the motor drives a belt-system, attached to a newly designed sub-platter, which is mounted into an ultra-precise 0.001mm main bearing with a hardened steel axle and brass bushing. The tonearm new tonearm has an effective length of 8.6”. This one-piece aluminium tonearm also features low-friction bearings for absolute accuracy in use. The T1 comes with a pre-adjusted Ortofon OM 5E Moving Magnet cartridge and is ready to use right out of the box. Also super shielded, semi-symmetrical, low-capacitance Pro-Ject phono cables are included. The T1 Phono SB version includes a built-in, Pro-Ject designed, high-quality phono MM stage and an electronic speed switch between 33 and 45 RPM. For the drive system, where most alternative products may use unregulated DC motors with wide speed fluctuations, the T1 Phono SB features our proven system of an electronically regulated, precision-speed AC motor. Product Features Precision belt-drive with accurately regulated speed stability and electronic 33/45 RPM speed change Built-in switchable phono stage - no external phono preamp required Anti-resonant sub-platter design Heavy 8mm, zero-resonance blasted-glass platter Precision CNC‘d heavy full chassis: NO hollow spaces, NO plastic Ortofon OM5e moving magnet pickup 8,6“ highly precise and light aluminium tonearm Low friction, vibration free tonearm bearing One-piece tonearm design with integrated headshell Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject Vibration absorbing feet Elegant dustcover with adjustable hinges Hand-made in Europe Technical Specifications Speed: 33,45 (electronic speed change) Belt drive Speed variance 33: 0.7% 45: 0.6% Wow & Flutter 33: 0.25% 45: 0.23% Platter: Heavy 8mm, blasted-glass platter with felt mat Main bearing: Stainless steel/brass Signal to noise: 65dB Tonearm: 8.6” aluminium Effective arm length: 218.5 mm Counterweight for mass: 5 - 10g (pre-mounted) Outputs: RCA Phono/Line (switchable) Included accessories: dustcover, feltmat, cable attached to record player Built-in Power Supply: 230V 50Hz (US: 110V 60Hz) Power consumption: 3 Watt max Dimensions: 415x100x335 mm (WxHxD) Weight: 3.8 kg net In the box T1 Phono SB with Ortofon OM 5E cartridge Connect it E Phono Cable Felt mat Dust cover Adapter for 7“ singles Power supply Allen key, stylus pressure gauge

More info

There was an error adding this product to your basket. Please try again.

Sold out

Ring & Reserve

*Availability subject to change.

To reserve this item in store, call: 03333 230 667

Delivery to the UK only
*Free UK delivery on orders over £20
(exclusions apply)
Usually dispatched within 24 hours
Click & Collect
Get it delivered to a store near you with FREE Click & Collect available on this product.
  • Details

    Released:
    28th September 2020
    Format:
    Turntables
    Barcode:
    9120097820044
  • Description

    New Generation Audiophile Entry Level Turntable with built-in Phono Stage & Electronic Speed Switch

    The stylish CNC-machined plinth of the T1 features no plastic parts and is carefully manufactured to ensure there are no hollow spaces inside, therefore avoiding unwanted vibrations within the chassis. Carrying this philosophy through the design, the glass platter is also a heavy, zero-resonance design. Finally, the purpose-chosen turntable feet also do a good job of isolating the T1 from ambient vibrations around your hi-fi system. In the T1 the motor drives a belt-system, attached to a newly designed sub-platter, which is mounted into an ultra-precise 0.001mm main bearing with a hardened steel axle and brass bushing. The tonearm new tonearm has an effective length of 8.6”. This one-piece aluminium tonearm also features low-friction bearings for absolute accuracy in use. The T1 comes with a pre-adjusted Ortofon OM 5E Moving Magnet cartridge and is ready to use right out of the box. Also super shielded, semi-symmetrical, low-capacitance Pro-Ject phono cables are included.

    The T1 Phono SB version includes a built-in, Pro-Ject designed, high-quality phono MM stage and an electronic speed switch between 33 and 45 RPM. For the drive system, where most alternative products may use unregulated DC motors with wide speed fluctuations, the T1 Phono SB features our proven system of an electronically regulated, precision-speed AC motor.

    Product Features
    Precision belt-drive with accurately regulated speed stability and electronic 33/45 RPM speed change
    Built-in switchable phono stage - no external phono preamp required
    Anti-resonant sub-platter design
    Heavy 8mm, zero-resonance blasted-glass platter
    Precision CNC‘d heavy full chassis: NO hollow spaces, NO plastic
    Ortofon OM5e moving magnet pickup
    8,6“ highly precise and light aluminium tonearm
    Low friction, vibration free tonearm bearing
    One-piece tonearm design with integrated headshell
    Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject
    Vibration absorbing feet
    Elegant dustcover with adjustable hinges
    Hand-made in Europe

    Technical Specifications
    Speed: 33,45 (electronic speed change) Belt drive
    Speed variance 33: 0.7% 45: 0.6%
    Wow & Flutter 33: 0.25% 45: 0.23%
    Platter: Heavy 8mm, blasted-glass platter with felt mat
    Main bearing: Stainless steel/brass
    Signal to noise: 65dB
    Tonearm: 8.6” aluminium
    Effective arm length: 218.5 mm
    Counterweight for mass: 5 - 10g (pre-mounted)
    Outputs: RCA Phono/Line (switchable)
    Included accessories: dustcover, feltmat, cable attached to record player
    Built-in Power Supply: 230V 50Hz (US: 110V 60Hz)
    Power consumption: 3 Watt max
    Dimensions: 415x100x335 mm (WxHxD)
    Weight: 3.8 kg net

    In the box
    T1 Phono SB with Ortofon OM 5E cartridge
    Connect it E Phono Cable
    Felt mat
    Dust cover
    Adapter for 7“ singles
    Power supply
    Allen key, stylus pressure gauge
  • Delivery and Returns

    Delivery charges

    • Orders under £20 - £2.99 postage fee
    • Orders £20 and over - FREE*
    • Click & Collect - FREE**
    • Express Delivery - £5.99
    *Selected items are only available for shipping via a dedicated delivery service for a charge.
    **Selected items are only available for delivery using Click & Collect to an hmv or FOPP store of your choice.

    For more information, please visit the ‘Delivery’ section of our Help Centre.


    When will my order arrive?

    • We aim to dispatch orders within 24 hours* 
    • Standard delivery is a Royal Mail Tracked 48® service and usually arrives within 2-5 working days, including Saturdays. 
    • Express delivery is either a Royal Mail Tracked 24® or DPD service, for delivery within two working days (if ordered by 2pm, Monday to Friday - excluding public holidays).
    • We’ll aim to dispatch pre-orders so that you receive them on the release date.
    *Items must be in stock to be dispatched within these timeframes. Where an item is 'Back in stock soon', we'll aim to receive more stock within a week and will dispatch orders once the stock has arrived.

    For more information, please visit the ‘Delivery’ section of our Help Centre.

    Will you tell me when my order is on its way?

    • We’ll send you a dispatch email when your items are on their way, but you can also check the status of your order in your account.
    • We don’t always ship everything together so check your dispatch email for more details - we’ll send you a dispatch email per parcel.
    • If your order contains items that are out of stock, we’ll ship the in-stock items as soon as we can and will dispatch the out-of-stock items as soon as we’ve received more stock.
    For more information, please visit the ‘Delivery’ section of our Help Centre.


    Trusted Suppliers

    Products labelled '*item fulfilled by Exertis on behalf of hmv' will be supplied to you directly by Exertis via their approved couriers. When you place an order for an item that is fulfilled by Exertis, your details shall be forwarded to them so that they can fulfil the order, and to their courier so that they can deliver the item.


    Returns

    • We're happy to accept returns for unwanted items provided that they're returned within 14 days of receipt; unopened, unused and in perfect condition.
    • Some exclusions apply, please visit the ‘Returns’ section of our Help Centre for more details. 
     
     
     
     
     
     
     
     
     

Sign-up for emails

Sign-up for emails

Sign-up for emails

I'd love to hear about offers and promotions from hmv*