Skip to content

Back to Technology Accessories

Audio Technica VM95 Series Conical Stereo Cartridge on AT-HS6 Headshell

£59.99

Released: 19th January 2023. AT-VM95C/H VM95 series Conical stereo cartridge on AT-HS6 Headshell AT-VM95C mounted on AT-HS6BK headshell The total set weight is 15.5g Assembled and tested in the Audio-Technica Factory in Fukui-Japan VM95 Series - Styli compatibility Every cartridge diamond stylus becomes worn after a period of play. Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus. Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus. The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible. AT-VMN95C AT-VMN95E AT-VMN95EN AT-VMN95ML AT-VMN95SH AT-VMN95SP Conical Bonded Stylus The benefit of conical styli, even if the cartridge is "lean Specifications Cartridge & Stylus Frequency Response    20 - 20,000 Hz Channel Separation    18 dB (1 kHz) Vertical Tracking Angle    23° Vertical Tracking Force    1.8 to 2.2g (2.0g standard) Stylus Construction    Bonded Round Shank Recommended Load Impedance    47,000 Ω Coil Impedance    3.3 kΩ (1 kHz) DC Resistance    485 Ω Coil Inductance    550 mH (1 kHz) Output Voltage    4.0 mV (@ 1 kHz, 5 cm/sec) Output Channel Balance    2.5 dB (1 kHz) Stylus Shape    Conical Cantilever    Aluminium Pipe Static Compliance    17 x 10 – 6 cm / dyne Dynamic Compliance    6.5 x 10 – 6 cm / dyne (100 Hz) Mounting    1/2” centres Dimensions    21.2 × 21.4 × 62.4 ( H x W x D mm) Model    AT-VM95C/H Recommended Load Capacitance    100-200 pF Replacement Stylus    AT-VMN95C Stylus Size    0.6 mil Type    VM Stereo Dual Magnet Weight    15.5 g Wire Used for Coil    T.P. Copper

More info

There was an error adding this product to your basket. Please try again.

Ring & Reserve

*Availability subject to change.

To reserve this item in store, call: 03333 230 667

Delivery to the UK only
*Free UK delivery on orders over £20
(exclusions apply)
Usually dispatched within 24 hours
Click & Collect
Get it delivered to a store near you with FREE Click & Collect available on this product.
  • Details

    Released:
    19th January 2023
    Format:
    Vinyl Accessories
    Barcode:
    4961310146535
  • Description

    AT-VM95C/H
    VM95 series Conical stereo cartridge on AT-HS6 Headshell
    • AT-VM95C mounted on AT-HS6BK headshell
    • The total set weight is 15.5g
    • Assembled and tested in the Audio-Technica Factory in Fukui-Japan
    VM95 Series - Styli compatibility
    Every cartridge diamond stylus becomes worn after a period of play.

    Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

    Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

    The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

    AT-VMN95C

    AT-VMN95E

    AT-VMN95EN

    AT-VMN95ML

    AT-VMN95SH

    AT-VMN95SP

    Conical Bonded Stylus
    The benefit of conical styli, even if the cartridge is "lean

    Specifications
    Cartridge & Stylus
    • Frequency Response    20 - 20,000 Hz
    • Channel Separation    18 dB (1 kHz)
    • Vertical Tracking Angle    23°
    • Vertical Tracking Force    1.8 to 2.2g (2.0g standard)
    • Stylus Construction    Bonded Round Shank
    • Recommended Load Impedance    47,000 Ω
    • Coil Impedance    3.3 kΩ (1 kHz)
    • DC Resistance    485 Ω
    • Coil Inductance    550 mH (1 kHz)
    • Output Voltage    4.0 mV (@ 1 kHz, 5 cm/sec)
    • Output Channel Balance    2.5 dB (1 kHz)
    • Stylus Shape    Conical
    • Cantilever    Aluminium Pipe
    • Static Compliance    17 x 10 – 6 cm / dyne
    • Dynamic Compliance    6.5 x 10 – 6 cm / dyne (100 Hz)
    • Mounting    1/2” centres
    • Dimensions    21.2 × 21.4 × 62.4 ( H x W x D mm)
    • Model    AT-VM95C/H
    • Recommended Load Capacitance    100-200 pF
    • Replacement Stylus    AT-VMN95C
    • Stylus Size    0.6 mil
    • Type    VM Stereo Dual Magnet
    • Weight    15.5 g
    • Wire Used for Coil    T.P. Copper
  • Delivery and Returns

    Delivery charges

    • Orders under £20 - £2.99 postage fee
    • Orders £20 and over - FREE*
    • Click & Collect - FREE**
    • Express Delivery - £5.99
    *Selected items are only available for shipping via a dedicated delivery service for a charge.
    **Selected items are only available for delivery using Click & Collect to an hmv or FOPP store of your choice.

    For more information, please visit the Delivery section of our Help Centre.


    When will my order arrive?

    • We aim to dispatch orders within 24 hours* 
    • Standard delivery is a Royal Mail Tracked 48® service and usually arrives within 2-5 working days, including Saturdays. 
    • Express delivery is either a Royal Mail Tracked 24® or DPD service, for delivery within two working days (if ordered by 2pm, Monday to Friday - excluding public holidays).
    • We’ll aim to dispatch pre-orders so that you receive them on the release date.
    *Items must be in stock to be dispatched within these timeframes. Where an item is 'Back in stock soon', we'll aim to receive more stock within a week and will dispatch orders once the stock has arrived.

    For more information, please visit the Delivery section of our Help Centre.

    Will you tell me when my order is on its way?

    • We’ll send you a dispatch email when your items are on their way, but you can also check the status of your order in your account.
    • We don’t always ship everything together so check your dispatch email for more details - we’ll send you a dispatch email per parcel.
    • If your order contains items that are out of stock, we’ll ship the in-stock items as soon as we can and will dispatch the out-of-stock items as soon as we’ve received more stock.
    For more information, please visit the Delivery section of our Help Centre.


    Trusted Suppliers

    Products labelled '*item fulfilled by Exertis on behalf of hmv' will be supplied to you directly by Exertis via their approved couriers. When you place an order for an item that is fulfilled by Exertis, your details shall be forwarded to them so that they can fulfil the order, and to their courier so that they can deliver the item.


    Returns

    • We're happy to accept returns for unwanted items provided that they're returned within 14 days of receipt; unopened, unused and in perfect condition.
    • Some exclusions apply, please visit the Returns section of our Help Centre for more details. 
     
     
     
     
     
     
     
     
     

Sign-up for emails

Sign-up for emails

Sign-up for emails

I'd love to hear about offers and promotions from hmv*