The AT-LP3XBT turntable combines 60 years of high-fidelity design with convenient Bluetooth® technology, giving you all the benefits of vinyl, with the freedom to connect to the latest Bluetooth® speakers or headphones. The successor model of the AT-LP3 turntable, the AT-LP3XBT includes upgraded features, such as wireless compatibility with the high-quality Qualcomm® aptXTM audio codec, the AT-VM95C cartridge, which is compatible with any of Audio-Technica‘s VM95 Series replacement styli, and the external AC adapter, which handles the AC/DC conversion outside of the chassis, reducing noise in the signal chain.
Features
- Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
- High-fidelity audio with Bluetooth wireless technology
- Connects wirelessly to speakers and other devices equipped with Bluetooth wireless technology or to wired audio systems and powered speakers via included dual RCA output cable
- AT-VM95C cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
- Compatible with the high-quality Qualcomm® aptXTM audio codec
- Balanced straight tonearm with hydraulically damped lift control and rest
- Includes the AT-HS3 universal headshell
- Built-in switchable phono/line pre-amplifier with detachable dual RCA output cable with grounding wire
- Anti-resonance, die-cast aluminium platter with felt mat
- Damped base construction for reduced low-frequency feedback colouration
- Included Accessories: detachable RCA output cable (Dual RCA male to dual RCA male with ground), 45 RPM adapter, removable hinged dust cover, and detachable power cable
- Available in black (AT-LP3XBTBK) and white (AT-LP3XBTWH)
General Specifications
- Power supply requirements: 100 to 240 V, 50/60 Hz, 0.6 A Max.
- Power consumption: 2W
- AC Adapter: 12 V, 0.5 A
- Dimensions (W × D × H): 435.6mm (17") ×374 mm (15 ") ×128 mm (5.0")
- Weight: 5.0 kg (11 lbs)
Accessories
- Dust cover
- Felt mat
- Platter (with drive belt)
- Dust cover hinges
- Counterweight
- Headshell (AT-HS3 BK) with VM stereo cartridge (AT-VM95C)
- 45-RPM adapter
- RCA audio cable (Approx. 1.0 m (3.3'))
- AC adapter (Approx. 1.5 m (4.9'))
Communication Specifications
- Communication system: Bluetooth version 5.2
- RF output: 2.5 mW EIRP
- Maximum communication range: Line of sight - approx. 10 m (33')
- Frequency band: 2.402 GHz to 2.480 GHz
- Modulation method: GFSK, Pi/4DQPSK, 8DPSK
- Compatible Bluetooth profiles: A2DP
- Supported codec Qualcomm® aptXTM Adaptive audio, Qualcomm® aptXTM audio, SBC
Cartridge and Headshell Specifications
- Cartridge Model: AT-VM95C
- Cartridge Type: VM
- Recommended load impedance: 47,000 ohms
- Output voltage: 4.0 mV (mV at 1 kHz, 5 cm/sec)
- Stylus: 0.6 mil bonded conical
- Cantilever: Aluminium pipe
- Tracking force range: 1.8 to 2.2 g (standard 2.0 g)
- Cartridge weight: 6.1 g (0.22 oz)
- Headshell model: AT-HS3 BK
- Headshell weight: 11.1 g (including lead wires) | 10.3 g (excluding lead wires)
- Headshell overhang adjustment: ±8 mm
Turntable Specifications
- Type: Belt-drive, fully automatic operation
- Moto:r DC motor
- Drive method: Belt drive
- Speeds: 33-1/3 RPM, 45 RPM
- Turntable platter: Die-cast aluminium
- Wow and flutter: < 0.2 % WRMS (33 RPM) at 3 kHz
- Signal-to-noise ratio: > 60 dB
- Output levels: PHONO: 4.0 mV nominal at 1 kHz, 5 cm/sec | LINE: 252 mV nominal at 1 kHz, 5 cm/sec
- Phono Pre-amp gain 36 dB nominal, RIAA equalised
Tonearm Specifications
- Type: Static balanced straight tonearm
- Effective length: 221.5 mm
- Overhang: 19 mm
- Maximum tracking error angle: Less than 3.0°
- Stylus pressure adjustment range: 1 to 4 g
- Applicable cartridge weight range (including headshell): 14.5 to 20 g
