Audio Technica AT-LP3XBT White Fully Automatic Belt-Drive Bluetooth Turntable

Released: 6th September 2022. The AT-LP3XBT turntable combines 60 years of high-fidelity design with convenient Bluetooth® technology, giving you all the benefits of vinyl, with the freedom to connect to the latest Bluetooth® speakers or headphones. The successor model of the AT-LP3 turntable, the AT-LP3XBT includes upgraded features, such as wireless compatibility with the high-quality Qualcomm® aptXTM audio codec, the AT-VM95C cartridge, which is compatible with any of Audio-Technica‘s VM95 Series replacement styli, and the external AC adapter, which handles the AC/DC conversion outside of the chassis, reducing noise in the signal chain. Features Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM High-fidelity audio with Bluetooth wireless technology Connects wirelessly to speakers and other devices equipped with Bluetooth wireless technology or to wired audio systems and powered speakers via included dual RCA output cable AT-VM95C cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application Compatible with the high-quality Qualcomm® aptXTM audio codec Balanced straight tonearm with hydraulically damped lift control and rest Includes the AT-HS3 universal headshell Built-in switchable phono/line pre-amplifier with detachable dual RCA output cable with grounding wire Anti-resonance, die-cast aluminium platter with felt mat Damped base construction for reduced low-frequency feedback colouration Included Accessories: detachable RCA output cable (Dual RCA male to dual RCA male with ground), 45 RPM adapter, removable hinged dust cover, and detachable power cable Available in black (AT-LP3XBTBK) and white (AT-LP3XBTWH) General Specifications Power supply requirements: 100 to 240 V, 50/60 Hz, 0.6 A Max. Power consumption: 2W AC Adapter: 12 V, 0.5 A Dimensions (W × D × H): 435.6mm (17") ×374 mm (15 ") ×128 mm (5.0") Weight: 5.0 kg (11 lbs) Accessories Dust cover Felt mat Platter (with drive belt) Dust cover hinges Counterweight Headshell (AT-HS3 BK) with VM stereo cartridge (AT-VM95C) 45-RPM adapter RCA audio cable (Approx. 1.0 m (3.3')) AC adapter (Approx. 1.5 m (4.9')) Communication Specifications Communication system: Bluetooth version 5.2 RF output: 2.5 mW EIRP Maximum communication range: Line of sight - approx. 10 m (33') Frequency band: 2.402 GHz to 2.480 GHz Modulation method: GFSK, Pi/4DQPSK, 8DPSK Compatible Bluetooth profiles: A2DP Supported codec Qualcomm® aptXTM Adaptive audio, Qualcomm® aptXTM audio, SBC Cartridge and Headshell Specifications Cartridge Model: AT-VM95C Cartridge Type: VM Recommended load impedance: 47,000 ohms Output voltage: 4.0 mV (mV at 1 kHz, 5 cm/sec) Stylus: 0.6 mil bonded conical Cantilever: Aluminium pipe Tracking force range: 1.8 to 2.2 g (standard 2.0 g) Cartridge weight: 6.1 g (0.22 oz) Headshell model: AT-HS3 BK Headshell weight: 11.1 g (including lead wires) | 10.3 g (excluding lead wires) Headshell overhang adjustment: ±8 mm Turntable Specifications Type: Belt-drive, fully automatic operation Moto:r DC motor Drive method: Belt drive Speeds: 33-1/3 RPM, 45 RPM Turntable platter: Die-cast aluminium Wow and flutter: < 0.2 % WRMS (33 RPM) at 3 kHz Signal-to-noise ratio: > 60 dB Output levels: PHONO: 4.0 mV nominal at 1 kHz, 5 cm/sec | LINE: 252 mV nominal at 1 kHz, 5 cm/sec Phono Pre-amp gain 36 dB nominal, RIAA equalised Tonearm Specifications Type: Static balanced straight tonearm Effective length: 221.5 mm Overhang: 19 mm Maximum tracking error angle: Less than 3.0° Stylus pressure adjustment range: 1 to 4 g Applicable cartridge weight range (including headshell): 14.5 to 20 g